Verifone Vx570 User Manual download pdf (Page 7)

POS Start Guide

Jan 2013 6 VeriFone Vx570

Vx570 Installation Instructions

These instructions will assist with the setup of the VeriFone Vx570 terminal. Select a

location that has access to a power outlet and a telephone line for your terminal.

Note: Digital Telephone lines are not compatible with any Medicaid POS terminals. Please

consult with your Telecommunications Department, Office Manager or Telephone

Company if you have any questions regarding your telephone service.

Quick Start

The Quick Start is an easy way to setup up the VeriFone Vx570 terminal.

1. Select a location that has access to a power outlet and a telephone line for your

terminal. Open the box and unpack the terminal.

2. Connect the telephone line cable into the telephone jack labeled with an image of a

telephone in the back of the terminal. Connect the other end into the wall jack.

3. Connect the power connector into the power port on the side of the terminal, and the

power cable into the power pack. Plug the three-prong power cable into the power

outlet.

4. After the device has gone through its start-up routine, the day, date, and time is

displayed on the top line of the terminal.

5. Enter your National Provider Identifier(s) (NPI) or MMIS Identification Number(s) (A

typical providers only). Refer to the section on Instructions for Provider Menu (P2 key) of

this manual.

6. If you are required to dial a number to get an outside line (e.g. ‘9’), Refer to the section

on Instructions for Setup Menu (P1 key) of this manual.

7. Press the F4 key or swipe the Medicaid ID card in the Magnetic Card Reader to begin

processing transactions to eMedNY.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Verifone Vx570 User Manual Page 7