TERMINAL SETUP
Installing/Replacing MSAM Cards
26 VX 520 REFERENCE GUIDE
4 Hold the MSAM cardholder panel, grasp firmly and pull upward to expose the
MSAM slots.
Figure 13 Removing MSAM Cover
4 Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
5 Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Figure 14 Installing an MSAM Card
6 Close the MSAM cardholder panel, and then replace the terminal rear cover.
Before inserting the MSAM card, position it as shown in Figure 14, with the card’s
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
Comments to this Manuals