VeriFone VX 520 Specifications Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 190
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
TERMINAL SETUP
Connecting Optional Devices
28 VX 520 REFERENCE GUIDE
Optional Device
Connections
The VX 520 terminal has a port that can operate either as a PIN Pad port or an
RS-232 port, depending on the power source available.
Connecting the PIN Pad or Smart Card Reader to the VX 520
Use the following procedures to connect a PIN Pad or smart card reader.
1 Remove the VX 520
terminal rear cover.
2 Insert the RJ-45-type connector of the PIN Pad or smart card reader into the
port of the peripheral device.
To install a PINpad 101, PINpad 201, or PINpad 1000, position and insert the
grommet to secure the cable connection.
If a cable is not already connected to the smart card reader or PIN Pad, insert
the small modular plug on one end of the interface cable into the optional
device’s modular jack.
3 Insert the larger RJ-45-type connector on the other end of the PIN Pad cable
into the PIN Pad serial port on the terminal. Figure 17 provides an example of
a smart card reader and PIN Pad connection to the PIN Pad serial port.
Figure 17 VX 520 Sample PIN Pad Connection
Connecting ECRs to the VX 520
The VX 520 terminal also supports Electronic Cash Registers (ECR). Contact
your VeriFone representative or visit the online store at www.store.verifone.com
for information on these devices.
NOTE
When the VX 520 terminal is powered via the corded power supply, the terminal
provides 4.0 A at 9.3V DC. This power will drive most VeriFone accessories.
Contact your local VeriFone representative for more information.
23
%4(
RS-232
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 189 190

Comments to this Manuals

No comments