VeriFone Vx510 Installation Guide download pdf (Page 23)

TERMINAL SETUP

Connect Optional Device(s)

5XX/V

6XX INSTALLATION GUIDE 23

6xx Optional

Device Connections

The side port of the V

6xx terminal can operate either as a PINpad port or an RS-

232 port, depending on the power source available.

Connecting the PINpad or Smart Card Reader to the V

6xx

When plugged in and not operating off battery power, the side port operates as a

PINPad port and the terminal can be connected to a PINpad (see Figure 16).

Use the following procedure to connect a PINpad or smart card reader.

1 Insert the RJ45-type connector on the end of the PINpad or smart card reader

into the port on back of the peripheral device.

To install a PINpad 101, PINpad 201, or PINpad 1000, position and insert the

grommet to secure the cable connection.

If a cable is not already connected to the smart card reader or PINpad, insert

the small modular plug on one end of the interface cable into the optional

device’s modular jack.

2 Insert the larger RJ45-type connector on the other end of the PINpad cable

into the PINpad serial port on the side of the terminal. Figure 16 provides an

example of a smart card reader and PINpad connection to the PINpad serial

port.

Figure 16 V

6xx Example PINpad Serial Port Connections

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

No comments

VeriFone Vx510 Installation Guide Page 23