VeriFone Vx510 Installation Guide download pdf (Page 27)

TERMINAL SETUP

Smart Battery

5XX/V

6XX INSTALLATION GUIDE 27

• activates when the battery is left in an unused terminal for extended

periods, and

• resets when battery voltage reaches a preset threshold during the charge

cycle.

Installation

The V

6xx smart battery fits in a slot on the back of the V

6xx terminal, as shown

in Figure 20. The locking tab clicks when the battery is in place. The slot is keyed,

so that there is only one way to insert the battery.

Figure 20 Install the Smart Battery

Removal

To remove the V

6xx smart battery, press the locking tab at the top of the battery

and pull the smart battery from its slot.

Figure 21 Detaching the Smart Battery from the V

6xx Terminal

Charging

After unpacking your V

6xx terminal, install the battery and connect the power

pack to the unit for 6 hours.

It is also recommended that the smart battery receive a periodic full discharge. To

ensure a full discharge, use the unit until the battery is fully drained.

The smart battery has a safety circuit to protect the Li-ion cells from overcharging

and over-discharging. If the battery is over-discharged, the safety circuit shuts

down the battery. The battery must then be recharged to restore operation.

NOTE

Conserve battery power by turning the V

6xx terminal off when not in use. If the

terminal is not to be used for several days, remove the battery from the terminal

as it continues to discharge even when the terminal is turned off.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 49 50

No comments

VeriFone Vx510 Installation Guide Page 27