VeriFone Omni 3200 Installation Guide download pdf (Page 12)

TERMINAL SETUP

Examine Terminal Features

12 INSTALLATION GUIDE

• A magnetic card reader, built into the right side. The icon at right

shows the proper swipe direction, with the stripe down and facing

inward, toward the keypad.

• A colored LED (Light Emitting Diode) indicator with the following states:

• Steady green indicates power is ON.

• Slow flashing green (roughly one flash per second) indicates no paper in

the printer.

• Fast flashing green (roughly two flashes per second) indicates a printer

mechanism error.

• Flashing red indicates the terminal is downloading printer-related files.

• An internal thermal printer.

• A paper roll cover release button.

• A paper feed button.

Back Panel

Turn the terminal around to view the back panel with the connection ports, under

the paper roll case. Notice the different ports used to connect the Omni 3200

SE/

3210SE teminal to a communications line, optional peripheral devices, and the

power supply (see Figure 4).

Figure 4 Connection Ports (Back Panel)

• Two RJ-11 modular phone jacks can be used to connect the Omni 3200SE/

3210

SE terminal to a telephone line:

• One port can be identified by a Telco icon, shown at right. Use

this port to connect the Omni 3200

SE/3210SE terminal directly to

a modular telephone wall jack (refer to Direct Connection).

• The other port can be identified by a by a Telset icon, shown at

right. Use this port to connect a telephone to the terminal (refer to

Pass-Through Connection).

NOTE

VeriFone ships different variants of the Omni 3200SE/3210SE terminal for different

markets. Your terminal may have a different configuration than the terminal shown

in this guide, but the basic processes remain the same, regardless of terminal

configuration.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

VeriFone Omni 3200 Installation Guide Page 12